The Specialty Manufacturing Company

Machinist l

New Ulm, MN
Full Time
Mid Level
The Specialty Mfg. Co. is large enough to produce standard products at scale, yet flexible enough to deliver superior quality, custom products at competitive prices. No day is the same here and everyday has new opportunities.

The Machinist l is responsible for end-to-end setup and precision machining of piece parts on modern CNC equipment. This individual will set up and run one of our Haas, Mazak, DMG Mori, Okuma Horizontal or Vertical mills and/or Turning centers and machine tight tolerance piece parts. This team member needs to have an elevated understanding of the full machining process, including but not limited to quality, productivity and cost. You will work in a clean, air-conditioned shop where efficiency and safety are paramount.
Essential Job Duties
  • Verifies operations to be performed and material to be used on each job as directed by the standard work, or the appropriate Supervisor or Manager.
  • Sets up CNC equipment using modern techniques
  • Ability to read blueprints and machine precision piece parts accordingly.
  • Ability to select and locate established tools for the job and trouble shoot tooling issues on existing programs.
  • Support problem-solving small group activities.
  • Operates machines and produces consistent quality parts to specifications in the time frame allowed.
  • Uses measuring devices and blueprints to inspect parts for quality. 
  • Uses hand tools, grinders, abrasives and other special deburring tools to remove sharp edges from machine surfaces.
  • Accurately completes all required paperwork at completion of job.
  • Perform Inspections as called out on work order
  • Maintains a safe and clean work area.
  • Performs routine autonomous maintenance at machines.
  • Any other duties as assigned by management.
Education
  • High School Diploma or GED required
  • 2-year Technical Degree preferred
Skills and Qualifications
  • Experience: 4+ years of CNC experience
  • Education: High School Diploma required; Technical Degree or equivalent experience preferred.
  • Technical Skills: Proven understanding and application of geometric dimensioning and tolerancing, metric measurements, measuring devices and inspection equipment, shop math, problem solving, and mechanical aptitude.
  • Attributes: High level of creativity for new product development and strong attention to detail.
  • Physical: Ability to stand for long periods, lift 50 lbs, and work in a loud environment.
Work Environment
  • Works in manufacturing environment with all daily activities taking place within our Machine Shop
  • May require periodic travel
  • All work is to be performed on site during normal business
Expected Compensation Range: Non-Exempt- $26-$34 per hour
Specialty Manufacturing is providing the compensation range that the company in good faith believes it might pay and offer for this position. Based on the successful applicant’s education, experience, knowledge, skills, and abilities, compensation could fall slightly below or above the stated range..
Specialty Mfg. provides a comprehensive suite of benefits including medical (~90% employer sponsored premiums), dental, vision, disability, life, and profit sharing retirement savings, focused on providing health and financial stability throughout the employee’s career. Specialty Mfg. operates an onsite work environment where employees are expected to work in the office 5 days per week.
 
Share

Apply for this position

Required*
We've received your resume. Click here to update it.
Attach resume or Paste resume
Attach resume as .pdf, .doc, .docx, .odt, .txt, or .rtf (limit 5MB) or Paste resume

Paste your resume here or Attach resume file

To comply with government Equal Employment Opportunity and/or Affirmative Action reporting regulations, we are requesting (but NOT requiring) that you enter this personal data. This information will not be used in connection with any employment decisions, and will be used solely as permitted by state and federal law. Your voluntary cooperation would be appreciated. Learn more.
Invitation for Job Applicants to Self-Identify as a U.S. Veteran
  • A “disabled veteran” is one of the following:
    • a veteran of the U.S. military, ground, naval or air service who is entitled to compensation (or who but for the receipt of military retired pay would be entitled to compensation) under laws administered by the Secretary of Veterans Affairs; or
    • a person who was discharged or released from active duty because of a service-connected disability.
  • A “recently separated veteran” means any veteran during the three-year period beginning on the date of such veteran's discharge or release from active duty in the U.S. military, ground, naval, or air service.
  • An “active duty wartime or campaign badge veteran” means a veteran who served on active duty in the U.S. military, ground, naval or air service during a war, or in a campaign or expedition for which a campaign badge has been authorized under the laws administered by the Department of Defense.
  • An “Armed forces service medal veteran” means a veteran who, while serving on active duty in the U.S. military, ground, naval or air service, participated in a United States military operation for which an Armed Forces service medal was awarded pursuant to Executive Order 12985.
Veteran status


Voluntary Self-Identification of Disability
Voluntary Self-Identification of Disability Form CC-305
OMB Control Number 1250-0005
Expires 05/31/2026
Why are you being asked to complete this form?

We are a federal contractor or subcontractor. The law requires us to provide equal employment opportunity to qualified people with disabilities. We have a goal of having at least 7% of our workers as people with disabilities. The law says we must measure our progress towards this goal. To do this, we must ask applicants and employees if they have a disability or have ever had one. People can become disabled, so we need to ask this question at least every five years.

Completing this form is voluntary, and we hope that you will choose to do so. Your answer is confidential. No one who makes hiring decisions will see it. Your decision to complete the form and your answer will not harm you in any way. If you want to learn more about the law or this form, visit the U.S. Department of Labor’s Office of Federal Contract Compliance Programs (OFCCP) website at www.dol.gov/ofccp.

How do you know if you have a disability?

A disability is a condition that substantially limits one or more of your “major life activities.” If you have or have ever had such a condition, you are a person with a disability. Disabilities include, but are not limited to:

  • Alcohol or other substance use disorder (not currently using drugs illegally)
  • Autoimmune disorder, for example, lupus, fibromyalgia, rheumatoid arthritis, HIV/AIDS
  • Blind or low vision
  • Cancer (past or present)
  • Cardiovascular or heart disease
  • Celiac disease
  • Cerebral palsy
  • Deaf or serious difficulty hearing
  • Diabetes
  • Disfigurement, for example, disfigurement caused by burns, wounds, accidents, or congenital disorders
  • Epilepsy or other seizure disorder
  • Gastrointestinal disorders, for example, Crohn's Disease, irritable bowel syndrome
  • Intellectual or developmental disability
  • Mental health conditions, for example, depression, bipolar disorder, anxiety disorder, schizophrenia, PTSD
  • Missing limbs or partially missing limbs
  • Mobility impairment, benefiting from the use of a wheelchair, scooter, walker, leg brace(s) and/or other supports
  • Nervous system condition, for example, migraine headaches, Parkinson’s disease, multiple sclerosis (MS)
  • Neurodivergence, for example, attention-deficit/hyperactivity disorder (ADHD), autism spectrum disorder, dyslexia, dyspraxia, other learning disabilities
  • Partial or complete paralysis (any cause)
  • Pulmonary or respiratory conditions, for example, tuberculosis, asthma, emphysema
  • Short stature (dwarfism)
  • Traumatic brain injury
Please check one of the boxes below:

PUBLIC BURDEN STATEMENT: According to the Paperwork Reduction Act of 1995 no persons are required to respond to a collection of information unless such collection displays a valid OMB control number. This survey should take about 5 minutes to complete.

You must enter your name and date
Human Check*